]]>
Statistics: Posted by Musimadeluxe25 — Sun Apr 03, 2011 10:33 am
]]>
I also find in my basement the other day jolanu Iris but all wire are cut off.
And i am also not technical oriented and cannot read that kind of schematics.
4-way switch is the biggest problem for connect.
Thanks in advanced
Saša from Croatia,Osijek
Statistics: Posted by osking — Tue Mar 22, 2011 6:57 am
]]>
I am not sure if this is correct but now every 4-position (neck, neck+bridge, bridge, bridge with treble booster) works ok with tone pot.
"the 2n2 condensor is needed to give some more treble to the bridge pu in position 4"
Latvis
rockdata.org
Statistics: Posted by Latvis — Mon Feb 21, 2011 3:29 am
]]>
Unfortunately I am not technical oriented and cannot read that kind of schematics... can someone draw basic wiring (how wires goes to pots/switch)...
even better? if someone who has Jolana can unscrew 4 screws, blow some dust and took sharp photo how the named wires goes. TIA
-L
Statistics: Posted by Latvis — Tue Feb 15, 2011 1:40 am
]]>
That should make more sense of it. If you're stuck, you could try emailing these guys, as recommended to me:
http://www.guitarelectronics.com/product/WD_CUSTOM_2/
Alternatively, if you're reasonably competent, take their standard diagram for a two humbucker set up with a five way switch and adapt it to suit.
Statistics: Posted by Sancho — Mon Feb 14, 2011 12:50 pm
]]>
Unfortunately someone has cutted & unsolder the wires and I do not know how to wire pickups... Has some one simple drawing or photo how to solder wires from pickups? (and what does 4-way switch?)
TIA
Latvis
rockdata.org
Finland[/img]
Statistics: Posted by Latvis — Mon Feb 14, 2011 9:31 am
]]>