]]>
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... :MEBIDX:IT
Statistics: Posted by Professor Batty — Tue Sep 07, 2010 9:50 pm
]]>
so all three working pups measure in 7.9k range?
please post some pics when you get guitar finished.
best,
m
Statistics: Posted by mike_C — Tue Sep 07, 2010 7:40 am
]]>
http://picasaweb.google.com/dktrfz/Guit ... Cdn9ru6wE#
Typical strat pole pieces are 5mm, spaced 10mm o.c., these are 6mm spaced 9mm o.c.
Bobbin was wrapped with waxy tape, fits snugly in cover. Foam pads on the bottom had crumbled, but probably damped pickups, to cut down on microphonics.
These pickups would probably be a pretty cool remake- although probably too microphonic for most players. The body cavities are completely shielded, the guitar is quiet.
Guitar should be re-assembled in a few weeks...
Statistics: Posted by Professor Batty — Mon Sep 06, 2010 4:40 pm
]]>
]]>
]]>
]]>
Statistics: Posted by Spud1950 — Thu Sep 02, 2010 6:05 pm
]]>
]]>
]]>
]]>
Statistics: Posted by Spud1950 — Wed Sep 01, 2010 11:21 pm
]]>
I almost wonder if it was Italian -- an Eko or similar.
Statistics: Posted by Phoenix59 — Tue Aug 31, 2010 9:02 pm
]]>
Your description of the pickups makes me think it was a Teisco SS-4L... (see my avatar) but then again, you mention tortoise shell. I'm not sure. Perhaps a Harmony Silhouette?
Statistics: Posted by offset59 — Tue Aug 31, 2010 8:04 pm
]]>
The body was shaped somewhat like a Fender Jazzmaster. It had a rosewood fingerboard and the headstock was six-on-one-side, but larger than a Fender.
If I recall correctly, it had a tortoiseshell pickguard. It had four silver pickups with covers that were perforated like the grill on an old fashioned microphone. There was a row of slider switches along the bass side of the pickguard; it seems like there were 6 of them, I'm not sure, but there were enough that they could select every possible pickup combination.
I'm assuming it was Japanese, but I could be wrong. Any ideas?
Statistics: Posted by Phoenix59 — Tue Aug 31, 2010 6:33 pm
]]>