Help with a Vox neck, Lynx, Super Lynx or other?

[xpatico]

Hey all,
I won a Vox neck on Ebay a while back and am trying to gather some information. I will try to post some pics, not sure how to do it. The neck as far as I can tell appears to be from a Lynx or Super Lynx. 25" scale, truss rod adjust at the nut under a cover with 2 screws, 21 fret, block pearloid inlays on fingerboard, 1 11/16 at the nut, 2 1/16 at the heel, heel is very thick 1 3/8, frets seem kinda small, finger board is very dark but doesn't look like it is stained. What kind of wood did Vox use on this fingerboard? Anyone know the year? Who has some tuners? I would be grateful for any info coming my way. Thanks.
Rob





Thanks for the heads-up on posting the images

[VintAxe]

Hi xpatico.

If you want to post pictures there are instructions under "Forum Help and Guidelines". I wrote the instructions a few years ago so I'm not sure whether every step is still valid but they will probably get you far enough to figure things out.

[RogerT]

It is a maple laminated EKO made neck w/ rosewood fretboard. It is not a 'Lynx' neck. I am going to say that it is most likely the neck from an early 1966 Bobcat ~ most Super Lynx and Super Lynx Deluxe had the truss rod adjustment on the bottom of the neck (body side), but Bob's had the headstock side adjustment and the Burt Wheedon pick style TRC. But later Bobcats had the body side truss rod adjustment. Confused yet? For tuners, you'll just have to buy new ones from a parts place - original are extremely hard to find.