The VintAxe Guitar Forum

A Place for Vintage Guitar Enthusiasts to Pursue their Passion

Norma Barney Kessel Wiring Volume Tone

Posts related to vintage guitars manufactured in Japan or other Asian countries

Moderators: cheepaxes, VintAxe, Phizix

by iesusko » Wed Mar 01, 2017 6:52 pm

When I was a teenager I found one of these in my attic. It didn't work so I asked my friend to fix it for me. Well when I got it back he had replaced the volume and tone with a simple two pot with 47 cap. Ironically it still didn't work. I now know more about fixing things and found that the ground wire to the bridge was the issue. Real pain to get those screws out to replace the wire. Anyway, I wanted it to be as original as possible but I don't have the original tone and volume. I was wondering if anyone here knows how they are supposed to be wired. It used to be a pot and a switch to select LMH. Thanks
iesusko
 
Posts: 1
Joined: Wed Mar 01, 2017 3:43 pm

by VintAxe » Tue Mar 07, 2017 7:06 pm

Hi lesusko.

I don't have a wiring diagram for your guitar but you might check with Brad the Guitologist. I think he draws schematics for the guitars he works on and he might have what you need.

You can contact him through his Facebook page:
https://www.facebook.com/pg/guitologist/posts/

Good luck with your project
User avatar
VintAxe
Site Admin
 
Posts: 2181
Joined: Sat Jul 15, 2006 10:52 am
Location: USA


Return to Vintage Japanese and Other Asian Electric Guitars

cron
  • View new posts
  • View unanswered posts
  • Who is online
  • In total there are 2 users online :: 0 registered, 0 hidden and 2 guests (based on users active over the past 5 minutes)
  • Most users ever online was 115 on Sat Jun 30, 2012 1:55 am
  • Users browsing this forum: No registered users and 2 guests